Главная
Пятница, 13.12.2024, 15:00



Приветствую Вас Гость | RSS
Главная
[ Новые сообщения · Участники · Правила форума · Поиск · Помощь форуму ]
  • Страница 1 из 1
  • 1
Ба-10 with ГАЗ-АА chassis
chippybomberДата: Пятница, 07.10.2016, 16:38 | Сообщение # 1
Рядовой
Группа: Мастера
Сообщений: 4
Награды: 0
Репутация: 1
Зарегистрировался: 07.10.2016
Статус: Offline
I'm sorry, but I don't speak Russian so I hope writing in English isn't a problem. Don't worry, you can reply in Russian - I'll just use a translation programme wink
Neo has invited me to share my work with you - I hope my models are not disappointing to you.

These are the pictures I'm using as references:



I'm using the chassis from this kit:


And this one for the rest:


Miniart chassis:







For the wheels I decided to use Miniart - the wheels of the HobbyBoss kit are too small:



As with all HobbyBoss/Trumpeter 45mm barrels, the one in this kit was not correct. So I shortened an RB metal barrel and combined it with the correct part from HobbyBoss:



I had added some rods for the front brakes, but had to remove them later as they were interfering with the hull:



HobbyBoss decided to make life difficult for modellers by adding attachment points inside the mating surfaces:



Added welds to the braces on the hull and turret:



I had planned to leave the doors open, but there is very little interior and I considered the steering wheel to be too thick:



The rear mudguards were made from thick metal foil:



I should have made them a little shorter, but did not have enough metal foil for another attempt:



Front mudguards were made from thick aluminium foil:





Braces on rear mudguards were made from plastic strip and Masterclub rivets:



Primer:



Paint:









I painted the tread of the tyres with Humbrol 121 enamel paint and then dry-brushed Vallejo Dark Rubber:



There will be a wash of thinned enamel paint later:



Now I am waiting for the decals to be delivered before I continue with the weathering.

I hope you like my work. коллеги спасибо
 
ag280682Дата: Пятница, 07.10.2016, 17:10 | Сообщение # 2
Сержант
Группа: Мастера
Сообщений: 172
Награды: 0
Репутация: 8
Зарегистрировался: 06.10.2016
Статус: Offline
Good choice of prototype for modelling. It looks great.

С уважением,
Андрей
 
NICEДата: Пятница, 07.10.2016, 18:46 | Сообщение # 3
Генерал-майор
Группа: Мастера
Сообщений: 1012
Награды: 10
Репутация: 206
Зарегистрировался: 12.07.2016
Статус: Offline
to help you http://www.dishmodels.ru/gshow.htm?p=11147
 
  • Страница 1 из 1
  • 1
Поиск:


Copyright Sarik,DNS,Neo © 2024